Wednesday 29 September 2021

Media key not functioning for knob

 #define TAP_CODE_DELAY 10

in config.h

at

Wednesday 22 September 2021

Flashing QMK/VIA hex

 

  1. Download QMK toolbox here: https://github.com/qmk/qmk_toolbox/releases/download/0.0.21/qmk_toolbox.exe 
  2. Install and launch 
  3. Tick autoflash 
  4. Open/Locate the hex file (official via download here, unofficial via please prepare yourself); dumbpad via here
  5. MCU: atmega32u4
  7.  Use tweezers or anything to reach the reset button (for reset button at the bottom of pcb). Make sure everything are ticked, chosen, and loaded as picture above. Press the reset button TWICE.
  8. Wait the flash. 
  10. "Success"!

 

 For unofficial via, you have to load the self-prepared json file. 

Via window download here . Other version refer to the official via website here.

 

 

Board with official via supported will be auto-detected; unofficial via supported board needs to load the json file by click FILE, IMPORT KEYMAP. Load your json file. 

 


 Now ready to remap.

 

 

 

 

at
Subscribe to: Posts (Atom)